Carbon Block Cartridges
The “Patriot”
Product Information
- In-house produced Pre-Filtration Polypropylene Media wrap
- Increased Adsorption based upon higher exposed small carbon particle make-up
- Proprietary Carbon Blend Formulation
- Uniformed Micro-porous Dual Action Activated / Sediment Carbon Block Construction eliminates channeling
- More Stable Pressure Consistency
- UV Welded end caps—No Glues or Adhesives
- No GAC By-pass or Fluidizing
- Substantial Carbon Volume with Maximum Service Life
- FDA Compliant Constructed Materials
- Available up to 40” Length in 2.5” & 4.5” Outside Diameter
- Multiple Micron Rated Cartridges Available
- Cartridges manufactured to reduce Foul Odor, Chlorine Taste and Particulate Matter
- Meets Federal EPA P231, State & Local Microbial Purification Standards
- Meets or Exceeds NSF P231 standards for Microbial Purifier Water Treatment Systems
- Able to be used under Gravity or Pressure Application
- Meets NSF/ANSI standards 42, 53 and 61
- Meets the regulatory requirements of Californian Act Proposition 65 for drinking water
Product Specifications
Product Specifications | |
---|---|
Micron Ratings | 1, 3, 5, 10 micron |
Construction | Carbon & Polypropylene |
End Caps | Polypropylene |
Maximum Operating Temperature: | 155°ree;F for Polypropylene |
Diameter: | O.D. - 2.5” to 4.5” I.D. - 1.1” center |
Nominal Lengths: | 9.75" to 40" |
Maximum Differential Pressure: | 7 psid |
FDA compliance under Title 21 of the code of federal regulations for food contact applications
Building a Product Number
Carbon Block | Media Cover | Micron | Cartridge Diameter |
Cartridge Length |
Element Grade |
End Cap (Help?) | Gasket/ O-Ring |
---|---|---|---|---|---|---|---|
CB | E | 1 | S | 2 | S | 2 | B |
CB √ | E = polypropylene √ |
1 3 5 10 |
S = 2.5" Standard M = 4.5" * |
2 = 9.75 3 = 10 4 = 19.5 5 = 20 6 = 29.25 7 = 30 8 = 39 9 = 40 C = Custom |
S = Standard |
1 = DOE/no caps √ 2 = 222/Fin √ 3 = 222/Spring √ 4 = 222/Flat √ 5 = 226/Flat 6 = 226/Fin 7 = 226/Spring 8 = SOE/Spring √ A = Custom |
B = Buna √ V = Viton® T = Teflon® S = Silicone √ N = Neoprene D = EPDM |
*4.5" diameter, only DOE is available
√ The following cartridge combinations have been Tested & Certified to:
NSF/ANSI 53 & 61 Standard
NSF/ANSI 42 Standard - Component